FAAC Gate Openers . Aqua Data Studio 7 Keygen Serial Numbers here. Ornamental & Rack Corp. NW 8. 2nd Street. Miami, Florida 3. Office: 3. 05- 6. Fax: 3. 05- 6. 96- 0. FAAC Swing Gate Operators / Openers.

FAAC Slide Gate Openers / Operators. FAAC Low Voltage Operators. FAAC Arm Barrier Oeprators.

FAAC are the market leaders in manufacturing automatic doors; our products include driveway and electric gates, access controls, swing gates and more.

FAAC 3. 90 2. 4V Openers & 4. D Control Panel. The Model 3. The 3. 90 is designed to primary accommodate large pillar installations. Also ideal for use on .

Cuadros de maniobra, comprar cuadros de maniobra para puertas al mejor precio. Envío express 24H. Compra donde compran los profesionales. FAAC 422 Electric Residential Swing Gate Opener-FAAC Hydraulic Openers: FAAC 422 CBAC Standard Basic Single Operator Kit - Includes 422 CBAC Operator, 455D Control. CONTROL BOARDS 455 D control board. 230v control board; can control one or two operators; LED. Gate Openers Replacement Boards, Gate Operators Repair Boards. The majority of Gate Openers or Gate Operators use either the Model 455D or Model 425D control panels.

The self- contained 3. Opener consists of a irreversible electromechanical motor and articulated arm. The locking the 3. Operator provides in the fullyopened and fully closed positions is a service device rather than a security device.

FAAC 4. 15 1. 15 VAC or 2. V VDC Swing Gate Operator. The Model 4. 15 low volt operator was designed to provide power and versatility to an economical residential swing operator.

The  4. 15 Compact Operator is an automatic residential applications and can accommodate a gate leaf up to 1. The self- contained 4. Compact Operator consists of an electric motor that drives a worm screw housed in an aluminum casing. The locking the 4. Operator provides in the fully opened and fully closed positions is a service device rather than a security device.

FAAC 7. 40 2. 4V Slide Gate Openers. The Model 7. 40 opener combines cutting- edge technology with sophisticated styling for single family residential applications. The 7. 40 is perfect for single family residences: access areas of medium transit frequency.

Features: Gate automatically locks when not operating, Battery back- up is optional, . The 7. 40- 2. 4V automated system is ideal for controlling vehicle access areas of medium transit frequency. The 7. 40- 2. 4V automated system for sliding gates is an electro- mechanical opener transmitting motion to the sliding gate via a rack pinion or chain appropriatelycoupled to the gate.

FAAC 7. 70 Low Voltage Swing Gate Operators. The Model 7. 70 swing gate operator is designed for residential and in- ground applications. The 7. 70 is a 2. VDC operator that features a 1. The 7. 70 is an in- ground operator and can swing a gate leaf of up to 1.

The 7. 70 COMPACT automation system for swing gates is a geared motor. It is designed for underground installation and therefore does not alter the appearance of the leaf. The foundation box of the automation system comes readyto take an operator. The 7. 70 electromechanical operator is irreversible, so it ensures a mechanical stop and eliminates the need to install an electric lock. FAAC 4. 00 Heavy duty Hydraulic Swing Gate Openers. The Model 4. 00 hydraulic swing gate opener is specifically designed for situations needing maximum versatility, such as certain apartment, subdivision, commercial / industrial and residential applications. It's strength also makes the 4.

The Model 4. 00’s quiet, yet powerful hydraulics produce smooth and safe gate operation. It’s compact size enhances gate design. The FAAC 4. 00 is an automatic gate opener for a swinging gate leaf.

It can accommodate a gate leaf of up to 2. FAAC 4. 12 Electromechanical Swing Gate Operators. The Model 4. 12 electromechanical swing gate operator is designed specifically for light single family residential use. The Model 4. 12 High Voltage includes One 4.

D control panel which operates single leaf or bi- parting gates. The Model 4. 12 Low Voltage includes One 4. D control panel which operates single leaf or bi- parting gates. The Model 4. 12, like other FAAC swing gate operators, is inherently safer because it hasfewer “pinch points.” In addition, the force it applies to move the gate is adjustable forextra entrapment protection. FAAC 4. 02 Hydraulic Swing Gate Openers. The Models 4. 02 hydraulic swing gate opener are designed for private residences.

They offer many of the benefits of a large gate operator in a compact form. The FAAC 4. 02 Opener is an automatic gate operator for a swinging gate leaf. It can accommodate a gate leaf of up to 9. The 4. 02 hydraulic system can hydraulically lock the gate in your choice of the opened or closed positions.

The 4. 02 system can hydraulically lock the gate in your choice of the opened and/or closed positions. Both models have versions that allow your gate system be set up to provide special options including “gate- safe” or “ gate- secure” configurations: FAAC 7.

In- Ground Swing Gate Openers. The Model 7. 50 hydraulic swing gate opener is designed specifically for underground installation in residential applications. Because of It’s power and invisibility, the 7. FAAC 7. 50 openers is equipped with a hydraulic bypass valve for extra entrapment protection and a manual release that allows youto operate your gate if there is a power failure. A battery back- up unit is also available. The 7. 50 offers Voltage or 1. VAC (1. 5 A) or 2.

VAC (1 A). The 7. Operator is an automatic gate operator for a swinging gate leaf. It can accommodate a gate leafof up to 1. FAAC 7. 60 Hydraulic Swing Gate Operators. The Model 7. 60 hydraulic swing gate operator is designed specifically for underground installation in residential applications.

Because of It’s power and invisibility, the 7. The Model 7. 60 includes the special feature of having both the power and pump units located underground. This integrated system results in simplified installation and maintenance, plus allows you to operate the manual release from inside or outside the gate. The 7. 60 also comes with a “soft stop” feature which slows down the gate leaf at the end of travel. FAAC 7. 46 Slide Gate Openers. The FAAC 7. 46 Compact Slide Gate Opener uses Gentle.

Slidetm Motion Management to slide gates with a pulling force of up to 3. This operator is available in two basic versions, the rack and pinion or the chain version. It comes as a package containing the drive unit and factory- wired electronic control panel inside the top cover of the unit. All external reversing devices and other accessories must be ordered separately. The control panel provides power for gate accessories of 2.

VDC (pulsed or constant). The maximum recommended amperage draw for accessories should notexceed 3. FAAC 8. 44 Slide Gate Openers. The FAAC 8. 44 Compact Slide Gate Opener is available in a rack and pinion or a chain model. It comes as a package containing the drive unit and electronic separately. The electronic control panel installed in the cover of the 8.

Operator is a microprocessor- based controller that accepts a full range of product accessories and  reversing devices to allow the maximum flexibility in designing the gate system. The advanced design of the opener features a small, self- contained unit composed of an electric motor with a built- in clutch and a reduction gear box, both housed in a die- cast aluminum casing. The motor drives the rack or chain to slide the gate.

FAAC 6. 15 Barrier Gate Openers. Big Benefits for Light - Medium Traffic Specifically designed for light - medium trafficapplications, the 6. With a 5. 0% duty cycle, the 6. The 6. 15 has manystandard features, including hydraulic anti- crushing safety, hydraulic locking so that the beam remains secure in the opened and closed positions, and a manual release with apersonalized key. Also standard is the versatile 4. D control panel. FAAC 6. Hydraulic Barrier Gate Openers.

The Model 6. 40 is the ideal hydraulic barrier for controlling heavy traffic at wide entrances. The 6. 40 operates continuously, raising aluminum beams from 1. The 6. 40 Barrier system is for barrier beams that are applications. The 6. 40 Barrier can also be skirted (Aluminum Beams Only). The 6. 40 Barriers are supplied with the FAAC 6.

BLD Control Panel. The control panel allowsyou to select the following: Logical mode of operation, Braking time of the beam, Pause time between opening and closing. FAAC 6. 20 Hydraulic Barrier Gate Operator. The Model 6. 20 is designed specifically for traffic control applications that require extremely fast opening and closing times.

When used with an aluminum beam of 8 1/2 feet or less, the 6. The 6. 20 system controls beams that are 6- 1/2 to 1. The 6. 20 is ideal for single- lane vehicular traffic in moderate to heavy traffic. The 6. 20 Barrier can also be articulated (jointed) for use with low overhead clearances or skirted to prevent vehicles from passing beneath the beam. Both the 6. 20 and 6. Barriers are supplied with the FAAC 6.

MPS Control Panel. FAAC 8. 20 Slide Gate Operators. The 8. 20 Slide Gate Operators are compact with Gentle. Slide Motion Management for high- traffic applications.

The 8. 20 is designed for medium- weight gates, and the 8. Either operator is available with a chain drive or a rack and pinion drive. The 8. 20 operator feature internal limit switches for gate leaves up to 5. The motor for the 8. Operator serves as a gate lock. For further reliability, the motor's armature shaft is mounted on double bearings.

The worm drive mechanism and single- plate clutch are encased in oil to lubricate their moving parts and dissipate the heat they generate during operation. FAAC 8. 60 Slide Gate Operators. The 8. 60 Slide Gate Operators are compact with Gentle. Slidetm Motion Management for high- traffic applications. The 8. 60 is designed for medium- weight gates, and the 8. Either operator is available with a chain drive or a rack and pinion drive. The 8. 60 operators feature internal limit switches for gate leaves up to 5.

The motor for the 8. Operator serves as a gate lock. For further reliability, the motor's armature shaft is mounted on double bearings. The worm drive mechanism and single- plate clutch are encased in oil to lubricate their moving parts and dissipate the heat they generate during operation.

FAAC 4. 22 Hydraulic Swing Gate Operators. They offer many of the benefits of a large gate operator in a compact form. The Models 4. 22 hydraulic swing gate operator are designed for private residences. They offer many of the benefits of a large gate operator in a compact form. The FAAC 4. 22 Operator is an automatic gate operators for a swinging gate leaf. It canaccommodate a gate leaf of up to 9.

FAAC Replacement Boards, FAAC Repair Boards. The majority of Gate Openers or Gate Operators use either the Model 4. D or Model 4. 25. D control panels.

The Control Panel, combined with other FAAC accessories, lets you decide how your. You can open your gates with a remote control from the safety and shelter of your car. Or you can have the gates open only when a magnetic . FAAC's Control Panel also allow you to add a telephone entry system so that you can open your gate simply by pushing the keys on your telephone. Or you can limit access to your property with a keypad that will allow entry only after a personal code is entered. There are many options available.

With an FAAC Control Panel, the choices and possible combinations are unlimited - and they are yours to make. We can help you make the choice that will best meet your needs. The same concern for safety in FAAC Operators is found the FAAC's Control Panel. It can be directed to automatically and quickly stop or reverse gate movement if something or someone is in the way.

We can assist you in addressing your specific safety concerns.